Energy $aver$ of America
* Helping to $ave the Earth's Resources and Protecting the Environment *tm
$aving Energy - $ave$ Money
It's the Really Smart Thing to do! tm

       
SilverHouse™ Advantage Program

 A simple program that offers homeowners 20% savings in energy costs. Adding a layer of our BTUBUSTERS tm radiant barrier in the attic and
 wrapping the house with our BTUFOIL tm Reflective Insulation will give the homeowner the SilverHouse Advantage. This is a program
 that every builder should have in their product offering. In today’s energy conscience world, reflective insulation and radiant
 barriers will add to a home’s overall VALUE, COMFORT and ENERGY $AVING$

Installation Sheet

Roof Application - Drape Method

• Ideal insulation for steel frame building application

• Quick and easy to install

• Provides reflective insulation for radiant heat loss/gain

• Blocks up to 97% of radiant heat

• Excellent vapor barrier

• Greatly reduces condensation

• Unaffected by moisture and humidity

            1) Precut BTUFOIL Reflective Insulation to length for application to top of roof perlins. Starting at the ridge apply 1st run, secure BTUFOIL Reflective                     Insulation by applying two-sided tape on the first C or Z channel

    2) Roll out BTUFOIL Reflective Insulation, allowing it to sag between the perlins, creating a 1” (approx.). air space between the top of the foil and the    
    bottom of the roof panel. Secure at edge perlin. Continue this application by applying 2nd piece of BTUFOIL Reflective Insulation next to 1st. Be sure to fit the two pieces closely together

    3) Seal all seams with approved BTUFOIL Reflective Insulation Tape (All tape should be applied using a flat edge-taping tool to ensure good adhesion.) This can be done either during installation from exterior side prior to panels being installed, or from the interior side after all panels are installed.

    4) Attach metal roofing panels with usual method either as shown in figure #1, or #2 below.
     


     
     

    Installation Sheet

    Wall Application

    • Ideal insulation for steel frame building application

    • Quick and easy to install

    • Provides reflective insulation for radiant heat loss/gain

    • Blocks up to 97% of radiant heat

    • Excellent vapor barrier

    • Greatly reduces condensation

    • Unaffected by moisture and humidity

    1) Precut BTUFOIL Reflective Insulation to length for application from top of edge perlin. Starting at the top edge and apply 1st run, secure BTUFOIL Reflective Insulation by applying two-sided tape on the first C or Z channel.

    2) Roll out BTUFOIL Reflective Insulation, allowing it to sag between the top & bottom ( base plate )Girt. Secure at each edge. Continue this application by applying 2nd piece of BTUFOIL Reflective Insulation next to 1st. Be sure to fit the two pieces closely together.

    3) Seal all seams with approved BTUFOIL Reflective Insulation Tape  (All tape should be applied using a flat edge-taping tool to ensure good adhesion.) This can be done either during installation from exterior side prior to panels being installed, or from the interior side after all panels are installed.

    4) Attach metal wall panels with usual method either as shown in figure #3, or #4 below.



 



Figure # 3
Figure # 4

PHOTOGRAPHS

Examples of how BTUFOIL Reflective Insulation can be installed on pre-engineered metal building roofs and walls.
 
 

Please contact us or your local dealer for any additional information you may require. Thank you.

Photo's of Metal Buildings during construction

Home

LISTING OF OUR PRODUCTS